XPRINTER-58 USB蓝牙打印机USB描述符
本文地址：http://dsyn.tongxinmao.com/Article/Detail/id/234
=========================== USB Port5 ===========================
Connection Status : 0x01 (Device is connected)
Port Chain : 1-5
======================== USB Device ========================
+++++++++++++++++ Device Information ++++++++++++++++++
Device Description : USB 打印支持
Device Path : \\?\usb#vid_0483&pid_070b#5&20c67efd&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Device ID : USB\VID_0483&PID_070B\5&20C67EFD&0&5
Hardware IDs : USB\VID_0483&PID_070B&REV_0254 USB\VID_0483&PID_070B
Driver KeyName : {36fc9e60-c465-11cf-8056-444553540000}\0059 (GUID_DEVCLASS_USB)
Driver : C:\Windows\system32\DRIVERS\usbprint.sys (Version: 6.1.7600.16385 Date: 2009-07-14)
Driver Inf : C:\Windows\inf\usbprint.inf
Legacy BusType : PNPBus
Class : USB
Class GUID : {36fc9e60-c465-11cf-8056-444553540000} (GUID_DEVCLASS_USB)
Interface GUID : {a5dcbf10-6530-11d2-901f-00c04fb951ed} (GUID_DEVINTERFACE_USB_DEVICE)
Service : usbprint
Enumerator : USB
Location Info : Port_#0005.Hub_#0001
Location IDs : PCIROOT(0)#PCI(1400)#USBROOT(0)#USB(5)
Container ID : {c6011569-e086-11e7-b205-001a7dda7113}
Manufacturer Info : Microsoft
Capabilities : 0x84 (Removable, SurpriseRemovalOK)
Status : 0x0180600A (DN_DRIVER_LOADED, DN_STARTED, DN_DISABLEABLE, DN_REMOVABLE, DN_NT_ENUMERATOR, DN_NT_DRIVER)
Problem Code : 0
Address : 5
Power State : D0 (supported: D0, D3, wake from D0)
Child Device 1 : 没有连接打印机
Device ID : USBPRINT\UNKNOWNPRINTER\6&3579ADB3&0&USB003
Class : USB
---------------- Connection Information ---------------
Connection Index : 0x05 (5)
Connection Status : 0x01 (DeviceConnected)
Current Config Value : 0x01
Device Address : 0x0B (11)
Is Hub : 0x00 (no)
Number Of Open Pipes : 0x02 (2)
Device Bus Speed : 0x01 (Full-Speed)
Pipe0ScheduleOffset : 0x00 (0)
Pipe1ScheduleOffset : 0x00 (0)
Data (HexDump) : 05 00 00 00 12 01 00 02 00 00 00 40 83 04 0B 07 ...........@....
54 02 01 02 03 01 01 01 00 0B 00 02 00 00 00 01 T...............
00 00 00 07 05 81 02 40 00 00 00 00 00 00 07 05 .......@........
02 02 40 00 00 00 00 00 00 ..@......
---------------------- Device Descriptor ----------------------
bLength : 0x12 (18 bytes)
bDescriptorType : 0x01 (Device Descriptor)
bcdUSB : 0x200 (USB Version 2.00)
bDeviceClass : 0x00 (defined by the interface descriptors)
bDeviceSubClass : 0x00
bDeviceProtocol : 0x00
bMaxPacketSize0 : 0x40 (64 bytes)
idVendor : 0x0483 (STMicroelectronics)
idProduct : 0x070B
bcdDevice : 0x0254
iManufacturer : 0x01 (String Descriptor 1)
Language 0x0409 : "Printer-58"
iProduct : 0x02 (String Descriptor 2)
Language 0x0409 : "USB Printing Support"
iSerialNumber : 0x03 (String Descriptor 3)
bNumConfigurations : 0x01 (1 Configuration)
Data (HexDump) : 12 01 00 02 00 00 00 40 83 04 0B 07 54 02 01 02 .......@....T...
03 01 ..
------------------ Configuration Descriptor -------------------
bLength : 0x09 (9 bytes)
bDescriptorType : 0x02 (Configuration Descriptor)
wTotalLength : 0x0020 (32 bytes)
bNumInterfaces : 0x01 (1 Interface)
bConfigurationValue : 0x01 (Configuration 1)
iConfiguration : 0x00 (No String Descriptor)
bmAttributes : 0xC0
D7: Reserved, set 1 : 0x01
D6: Self Powered : 0x01 (yes)
D5: Remote Wakeup : 0x00 (no)
D4..0: Reserved, set 0 : 0x00
MaxPower : 0x32 (100 mA)
Data (HexDump) : 09 02 20 00 01 01 00 C0 32 09 04 00 00 02 07 01 .. .....2.......
02 00 07 05 81 02 40 00 00 07 05 02 02 40 00 00 ......@......@..
---------------- Interface Descriptor -----------------
bLength : 0x09 (9 bytes)
bDescriptorType : 0x04 (Interface Descriptor)
bInterfaceNumber : 0x00
bAlternateSetting : 0x00
bNumEndpoints : 0x02 (2 Endpoints)
bInterfaceClass : 0x07 (Printer)
bInterfaceSubClass : 0x01
bInterfaceProtocol : 0x02
iInterface : 0x00 (No String Descriptor)
Data (HexDump) : 09 04 00 00 02 07 01 02 00 .........
----------------- Endpoint Descriptor -----------------
bLength : 0x07 (7 bytes)
bDescriptorType : 0x05 (Endpoint Descriptor)
bEndpointAddress : 0x81 (Direction=IN EndpointID=1)
bmAttributes : 0x02 (TransferType=Bulk)
wMaxPacketSize : 0x0040 (64 bytes)
bInterval : 0x00 (ignored)
Data (HexDump) : 07 05 81 02 40 00 00 ....@..
----------------- Endpoint Descriptor -----------------
bLength : 0x07 (7 bytes)
bDescriptorType : 0x05 (Endpoint Descriptor)
bEndpointAddress : 0x02 (Direction=OUT EndpointID=2)
bmAttributes : 0x02 (TransferType=Bulk)
wMaxPacketSize : 0x0040 (64 bytes)
bInterval : 0x00 (ignored)
Data (HexDump) : 07 05 02 02 40 00 00 ....@..
-------------------- String Descriptors -------------------
------ String Descriptor 0 ------
bLength : 0x04 (4 bytes)
bDescriptorType : 0x03 (String Descriptor)
Language ID[0] : 0x0409 (English - United States)
Data (HexDump) : 04 03 09 04 ....
------ String Descriptor 1 ------
bLength : 0x16 (22 bytes)
bDescriptorType : 0x03 (String Descriptor)
Language 0x0409 : "Printer-58"
Data (HexDump) : 16 03 50 00 72 00 69 00 6E 00 74 00 65 00 72 00 ..P.r.i.n.t.e.r.
2D 00 35 00 38 00 -.5.8.
------ String Descriptor 2 ------
bLength : 0x2A (42 bytes)
bDescriptorType : 0x03 (String Descriptor)
Language 0x0409 : "USB Printing Support"
Data (HexDump) : 2A 03 55 00 53 00 42 00 20 00 50 00 72 00 69 00 *.U.S.B. .P.r.i.
6E 00 74 00 69 00 6E 00 67 00 20 00 53 00 75 00 n.t.i.n.g. .S.u.
70 00 70 00 6F 00 72 00 74 00 p.p.o.r.t.
------ String Descriptor 4 ------
bLength : 0x16 (22 bytes)
bDescriptorType : 0x03 (String Descriptor)
Language 0x0409 : "PCP Config"
Data (HexDump) : 16 03 50 00 43 00 50 00 20 00 43 00 6F 00 6E 00 ..P.C.P. .C.o.n.
66 00 69 00 67 00 f.i.g.
------ String Descriptor 5 ------
bLength : 0x1C (28 bytes)
bDescriptorType : 0x03 (String Descriptor)
Language 0x0409 : "PCP Interface"
Data (HexDump) : 1C 03 50 00 43 00 50 00 20 00 49 00 6E 00 74 00 ..P.C.P. .I.n.t.
65 00 72 00 66 00 61 00 63 00 65 00 e.r.f.a.c.e.上一篇：检测树莓派硬件版本
下一篇：C文件和函数注释示例